Antenna Party 
WØAIH's Gin Pole made out of Rohn 25 is on the way up.
WØAIH's Gin Pole made out of Rohn 25 is on the way up.
Viewed: 1753 times.

Paul WØAIH on the Gin Pole. (pic courtesy WA9HCZ)
Paul WØAIH on the Gin Pole. (pic courtesy WA9HCZ)
Last comment 08/24/06.
Viewed: 1760 times.

TOWER: Paul WØAIH on the Gin Pole with Chris KC9DGP below. GROUND: (l-r) Scott KA9FOX and Eric KB9TKF prepare 2m antenna for final testing. (pic courtesy WA9HCZ)
TOWER: Paul WØAIH on the Gin Pole with Chris KC9DGP below. GROUND: (l-r) Scott KA9FOX and Eric KB9TKF prepare 2m antenna for final testing. (pic courtesy WA9HCZ)
Viewed: 1496 times.

Paul WØAIH on the Gin Pole with Chris KC9DGP below.
Paul WØAIH on the Gin Pole with Chris KC9DGP below.
Last comment 01/01/07.
Viewed: 1354 times.

Chris KC9DGP wondering what the record is for pole sitting.
Chris KC9DGP wondering what the record is for pole sitting.
Viewed: 1886 times.

Chris KC9DGP Pole Sitting again
Chris KC9DGP Pole Sitting again
Viewed: 1427 times.

22.5 Foot Chrome Moly Mast from Array Solutions... Going UP!
22.5 Foot Chrome Moly Mast from Array Solutions... Going UP!
Viewed: 1316 times.

WØAIH and KC9DGP awaiting the arrival of the mast.
WØAIH and KC9DGP awaiting the arrival of the mast.
Viewed: 1211 times.

Ground Crew (L-R) Bill KE9XQ, Mark N9UNW and Jerome WA9HCZ.  Note the WØAIH 220v electric winch attached to truck towing receiver
Ground Crew (L-R) Bill KE9XQ, Mark N9UNW and Jerome WA9HCZ. Note the WØAIH 220v electric winch attached to truck towing receiver
Viewed: 1291 times.

Eric KB9TKF on Ground Crew duty.
Eric KB9TKF on Ground Crew duty.
Viewed: 1200 times.

Paul WØAIH and Chris KC9DGP inserting mast into rotor plate and bearing.
Paul WØAIH and Chris KC9DGP inserting mast into rotor plate and bearing.
Viewed: 1359 times.

Paul WØAIH and Chris KC9DGP inserting mast into rotor plate and bearing.
Paul WØAIH and Chris KC9DGP inserting mast into rotor plate and bearing.
Viewed: 1231 times.

Home of KA9FOX in background.  Eric KB9TKF manning the ropes. Note how the wind is blowing the rope -- it got VERY windy in the afternoon.
Home of KA9FOX in background. Eric KB9TKF manning the ropes. Note how the wind is blowing the rope -- it got VERY windy in the afternoon.
Viewed: 1316 times.

An extra rotor plate was installed to help keep mast centered during any future maintenance. An old TB3 bearing was put on but still needs to be properly mounted.
An extra rotor plate was installed to help keep mast centered during any future maintenance. An old TB3 bearing was put on but still needs to be properly mounted.
Viewed: 1267 times.

(L-R) Paul WØAIH and Chris KC9DGP working on tower.  Note guy wires are Polygon Fiberglass Rod.  Also note rope going mostly vertical is backstay for gin pole.
(L-R) Paul WØAIH and Chris KC9DGP working on tower. Note guy wires are Polygon Fiberglass Rod. Also note rope going mostly vertical is backstay for gin pole.
Viewed: 1404 times.

Paul WØAIH on the "Rohn 25 Gin Pole"
Paul WØAIH on the "Rohn 25 Gin Pole"
Viewed: 1289 times.

(L-R) Bill KE9XQ, Jerome WA9HCZ, Mark N9UNW and Eric KB9TKF watch as Paul WØAIH attaches rope to Cushcraft 6 element 6 meter beam.
(L-R) Bill KE9XQ, Jerome WA9HCZ, Mark N9UNW and Eric KB9TKF watch as Paul WØAIH attaches rope to Cushcraft 6 element 6 meter beam.
Viewed: 1249 times.

Mastic and Scotch Super 33 will attempt to keep the water out of the 6 meter beam feedpoint.
Mastic and Scotch Super 33 will attempt to keep the water out of the 6 meter beam feedpoint.
Viewed: 1319 times.

(L-R) Bill KE9XQ, Scott KA9FOX, Eric KB9TKF and Paul WØAIH as the 6m beam is about to be pulled up the tram line. (pic courtesy WA9HCZ)
(L-R) Bill KE9XQ, Scott KA9FOX, Eric KB9TKF and Paul WØAIH as the 6m beam is about to be pulled up the tram line. (pic courtesy WA9HCZ)
Viewed: 1295 times.

(L-R) Ground Crew: Bill KE9XQ, Jerome WA9HCZ, Mark N9UNW and Eric KB9TKF
(L-R) Ground Crew: Bill KE9XQ, Jerome WA9HCZ, Mark N9UNW and Eric KB9TKF
Viewed: 1207 times.

6 meter beam is about to go up.
6 meter beam is about to go up.
Viewed: 1117 times.

6 Meter beam has been attached to Tramline and is on the way up!
6 Meter beam has been attached to Tramline and is on the way up!
Viewed: 1197 times.

There goes the 6 meter beam up the Tram line.
There goes the 6 meter beam up the Tram line.
Viewed: 1306 times.

(L-R) Bill KE9XQ and Mark N9UNW assist as the 6m beam is pulled up the tram line. (pic courtesy WA9HCZ)
(L-R) Bill KE9XQ and Mark N9UNW assist as the 6m beam is pulled up the tram line. (pic courtesy WA9HCZ)
Viewed: 1155 times.

Paul WØAIH climbs tower after 6m beam was pulled to the top. (Photo by WA9HCZ)
Paul WØAIH climbs tower after 6m beam was pulled to the top. (Photo by WA9HCZ)
Viewed: 1181 times.

Eric KB9TKF, Bill KE9XQ, Scott KA9FOX and Paul WØAIH prepare to raise F12 80m dipole for testing.  Note temporary mast installed to hold loading wires up. (Photo by WA9HCZ)
Eric KB9TKF, Bill KE9XQ, Scott KA9FOX and Paul WØAIH prepare to raise F12 80m dipole for testing. Note temporary mast installed to hold loading wires up. (Photo by WA9HCZ)
Viewed: 1330 times.

Inside shot of the Force 12 80 meter CW/SSB Relay box before it goes up the tower.
Inside shot of the Force 12 80 meter CW/SSB Relay box before it goes up the tower.
Viewed: 1584 times.

Another shot of the 80m CW/SSB relay box.  Also shows hairpin helical match and Force 12 1:1 bead balun.
Another shot of the 80m CW/SSB relay box. Also shows hairpin helical match and Force 12 1:1 bead balun.
Viewed: 1486 times.

Force 12 EF-180C 80m Rotatable Dipole is on the Tram line and on the way up!
Force 12 EF-180C 80m Rotatable Dipole is on the Tram line and on the way up!
Viewed: 1547 times.

Chris KC9DGP just can't get enough of that pole sitting.  Especially when the winds gust to 30 mph.
Chris KC9DGP just can't get enough of that pole sitting. Especially when the winds gust to 30 mph.
Last comment 06/07/07.
Viewed: 1676 times.

Powered by Gallery v1